12mm pixel module
IC type: 2811 1603 1903
Waterproof grade: IP67
Input Voltage: DC5V
Power consumption: 0.3w
Punch hole size: Diameter 12MM
Light color: RGB full color
|12mm pixel module Square(15x15mm)|
|IC type: WS2811 |
|Waterproof grade: IP68|
|Input Voltage: DC5V|
|Power consumption: 0.3w|
|Punch hole size: Diameter 12MM|
|Light color: RGB full color|
full color Pixels are digitally-controllable lights you can set to any color, or animate
Each RGB LED and controller chip is molded into a 'dot' of silicone.
The dots are waterproof and rugged.
There are four flanges molded in so that you can 'push' them
into a 12mm drill hole in any material up to 1.5mm/0.06" thick
They are typically used to make outdoor signs. Compared to our other 20mm LED dots
these are diffused 8mm LEDs so they are not as bright but they color mix a little nicer.
The pixels are connected by a 3-conductor cable. Red is +5V, white is Ground, green is Data and
Data is shifted down from one pixel to the next so that you can easily
cut the strand or attach more onto the end.
Each dot is digitally controlled, with an internal 5-bit PWM LED driver (15-bit color for 32,768 different shades). The pixels must be clocked by a microcontroller
The pixels use 8mm diffused RGB LEDs
with brightness of about 300 mcd per individual r/g/b LED.
Programable by Software
Conformal Coating,PVC glue protection
IP68, Water-proof protection
Easy installation (punching 12mm hole on metal panel)
50pcs per set
1. LED exposed light string voltage of DC5V Please note that the use of voltage.
2. such as the discovery of individual lamp is not lit, check the lights or lines and procedures
Path and contour lighting
Backlight for signage/ letters
Architectural lights for Canopy, Corridor, Window, Archwa
DIY Lights for home use
Replacement of Fluorescent light
Decorative lights for holiday, event, show, exhibition